A great little "feature" of Cisco's Identity Services Engine is that out of the box, the administrator account expires after 45 days if the password is not changed during that time. The documentation says that if you have trouble logging in you should click the "Problem logging in?" link and use the default administrative user/pass. This is of course ridiculous and does not work.

Below are the steps for properly resetting an admin password and for changing the security policy so the lockout doesn't happen again.

This post is going to provide a very basic introduction to configuring VRFs on Cisco IOS and Juniper's Junos. There's so many configuration combinations and options for virtual routing that it would be impossible to go through everything in great detail. At the end of the post I'll provide links to documentation where you can get detail if you want it.

All network engineers should be familiar with the method for virtualizing the network at Layer 2: the VLAN. VLANs are used to virtualize the bridging table of Layer 2 switches and create virtual switching topologies that overlay the physical network. Traffic traveling in one topology (ie VLAN) cannot bleed through into another topology. In this way, traffic from one group of users or devices can be kept isolated from other users or devices.

VLANs work great in a Layer 2 switched network, but what happens when you need to maintain this traffic separation across a Layer 3 boundary such as a router or firewall?